
①  Driven Pulley:
Main driving component for centre drive belt conveyors:
Select BP-D series pulley (rotating shaft).
 
②  Head & Tail Pulley:
Installed at each end of a belt conveyor according to the different drive type and structure:
a、Centre drive:
Change the belt direction: Select BP-R series pulley (fixed shaft) or DP-D series pulley   
(rotating shaft)
b、Head or Tail drive:
Drive Pulley: Select BP-D series pulley (rotating shaft)
Idler Pulley: Select BP-R series pulley (fixed shaft) or BP-D series pulley (rotating shaft).
 
③  Snub Pulley:
Used to increase the belt wrap angle for the driven pulley, tension and tracking the belt.
Select BP-R series pulley (fixed shaft) or 1200 series conveyor roller.
Be careful about the belt tensionning and siding focce when using as redirection & tensioning.
 
④  Carrying Roller:
Used to support the belt, simplify structure and reduce friction:
Select 1200 series conveyor roller.
 
Basic Parameters
 
| Roller Model | DMR67 | DMR100 | 
| Tube Dia. | 67mm | 100mm | 
| Rated Power | 0.4kW | 0.75kW | 1.1kW | 
| Rated Torque | 4N·m | 10N·m | 15N·m | 
| Rated Voltage | AC 1X220V(±10%)/ 50Hz | 
| Length Range | 300-1000mm | 400-1400mm | 500-1400mm | 
| Speed Range 
 | 30~150m/min | 
| Working Method | Start-stop frequency ≤2000 cycles per hour,continuous running | 
Drum motor roller must be used with a driver and cannot be directly connected to the AC power supply.
 
Dimensions

 
| Model | Tube Dia.(D) | Drum Shape(D1) | Shaft Dia.(d) | Milled Flat | Cable Length(C) | 
| DMR 67 | 70mm | 67mm | 20mm | width(B) | 1000mm | 
| DMR100 | 103mm | 100mm | 30mm | 14~17mm | 800mm | 
•Rapid response,precise position control  
•Supports RS485,CANOPEN and EtherCAT bus protocols
•Adjustable parameter panel for real-time  monitoring of Roller running status
•Meets long-distance roller cable
 
Drive Technical Data
 
| Rated Voltage | AC 1X220V(±10%) | 
| Rated Power | 0.4kW / 0.75kW / 1.1kW | 
| Start-stop Frequency | ≤ 2000 cycles per hour | 
| Control Mode | I/O & Bus | 
| Bus Communication | RS485 / CANopen / EtherCAT | 
| Maximum Extention Cable | 15m |